nxdns/docs/how-to/install-with-systemd.md

Install nxdns with systemd

Installs nxdns as a system service on a Linux host with systemd, including a Raspberry Pi 5. At the end the service answers DNS on port 53 and starts on boot.

The normal path is to download a released tarball, verify it, and install what is inside it. Building from source is still supported and is the last section of this page.

For what each flag does, see the CLI reference; for what each configuration field means, see the configuration reference.

Verification: systemd-analyze verify was run on the machine that wrote this page. nxdns check, nxdns import, nxdns export and nxdns run were run there too, but against a scratch --data-dir and --config on an unprivileged port, because that machine is not a deploy target and has no /etc/nxdns, no /var/lib/nxdns and no root. The steps that need root on a target host — install, systemd-sysusers, systemctl — were not run; they are marked where they appear.

The download in step 1 could not be run at all: this repository has no tags and no published release, so every release URL on this page is a 404 today. Its commands are the ones Verify a release covers in full, and the URL shapes — including the releases/latest redirect the version is read from — were probed there against gitea.com, a public instance running the same Gitea series.

The zig build dist and zig build verify-dist blocks in the last section were run here, both to completion and both exiting 0; that section carries the detail.

1. Download and verify

Two static musl tarballs are published per release, one per architecture. Pick x86_64-linux-musl for a normal PC or server and aarch64-linux-musl for a Raspberry Pi 5.

BASE=https://git.mial.net/mokhtar/nxdns
VERSION=$(curl -fsS -o /dev/null -w '%{redirect_url}' "$BASE/releases/latest" |
  sed 's#.*/releases/tag/v##')
mkdir -p ~/nxdns-release && cd ~/nxdns-release
curl -fLO "$BASE/releases/download/v$VERSION/nxdns-$VERSION-x86_64-linux-musl.tar.gz"
curl -fLO "$BASE/releases/download/v$VERSION/SHA256SUMS.txt"
curl -fLO "$BASE/releases/download/v$VERSION/SHA256SUMS.txt.asc"

The first line asks the server which release is current instead of hardcoding a number that goes stale one release later — Gitea redirects releases/latest to the newest published release's tag page. To install a particular version instead, set VERSION=<version> yourself with the one you want; the tarball filenames carry the version either way, so there is no version-free download URL for them.

Verify before you extract. The signature is over SHA256SUMS.txt, and SHA256SUMS.txt is over the tarballs:

gpg --verify SHA256SUMS.txt.asc SHA256SUMS.txt
sha256sum -c --ignore-missing SHA256SUMS.txt
tar -xzf "nxdns-$VERSION-x86_64-linux-musl.tar.gz"

Verify a release has the whole procedure: where the public key comes from, what fingerprint to expect, what each failure means, and what the signature does and does not prove. Read it once before your first install.

The extracted directory nxdns-$VERSION-x86_64-linux-musl/ holds everything this page installs:

File	What it is
nxdns	The static binary, mode 0755
nxdns.service	The systemd unit
nxdns.conf	The sysusers fragment that creates the nxdns user
LICENSE	EUPL-1.2
THIRD-PARTY-NOTICES	Licences of everything compiled or bundled in
INSTALL.md	A short version of this page

Not verified on this host: no release exists yet, so none of these commands could be run against one — the releases/latest lookup returns 404 for this repository and leaves VERSION empty. The same lookup was run against gitea.com/gitea/tea on Gitea 1.27.0+dev and printed 0.15.1.

2. Copy the files to the target

cd "nxdns-$VERSION-x86_64-linux-musl"
scp nxdns nxdns.service nxdns.conf target:/tmp/

For a Raspberry Pi 5, extract the aarch64-linux-musl tarball instead — see Raspberry Pi 5 below.

Not verified on this host: target is a placeholder for your server's hostname, and the machine that wrote this page has no second host to copy to.

Before copying, you can confirm the unit file parses:

systemd-analyze verify nxdns.service

Off the target host this prints one complaint and exits 1:

nxdns.service: Command /usr/local/bin/nxdns is not executable: No such file or directory

That is the ExecStart path check finding no binary yet. Any other message is a real problem with the unit. On the target, after step 3, the same command should print nothing.

Verified on this host against deploy/systemd/nxdns.service in a checkout, which is the same file the tarball ships — the path is the only difference.

3. Install the binary, the user and the unit

Run as root on the target:

install -m 0755 /tmp/nxdns /usr/local/bin/nxdns

install -m 0644 /tmp/nxdns.conf /usr/lib/sysusers.d/nxdns.conf
systemd-sysusers

install -m 0644 /tmp/nxdns.service /etc/systemd/system/nxdns.service
systemctl daemon-reload

mkdir -p -m 0755 /etc/nxdns

The sysusers fragment ships under the name it is installed as, so there is no rename to get wrong.

Not verified on this host: these commands need root on a target machine. The files they install were read at HEAD and the unit was checked with systemd-analyze verify.

The service user is a static one, not DynamicUser: a TLS key for the DoH or DoT listener has to be chown-able to a uid that survives a restart.

Do not create /var/lib/nxdns or /var/log/nxdns by hand. The unit's StateDirectory and LogsDirectory settings make systemd create them on first start, /var/lib/nxdns at mode 0700 owned by nxdns.

/etc/nxdns is the one directory the mkdir above is for. The unit's ConfigurationDirectory=nxdns also creates it, but not until the first start in step 5, and step 4 has to write a file into it before then. systemd does not mind finding the directory already there; it adjusts the mode and ownership to what the unit asks for.

4. Write the seed configuration

nxdns starts from an empty database only if a configuration file tells it what to forward to. Write /etc/nxdns/config.zon. The smallest file that starts is one group named default and one enabled upstream:

.{
    .groups = .{ .{ .name = "default" } },
    .upstreams = .{ .{ .url = "https://cloudflare-dns.com/dns-query" } },
    .web = .{ .password = "choose-a-real-password" },
}

That file holds a password in plain text, so restrict it as soon as you have written it:

chown root:nxdns /etc/nxdns/config.zon
chmod 0640 /etc/nxdns/config.zon

Root's umask is 022 on most distributions, so a freshly written /etc/nxdns/config.zon is mode 0644 and every account on the host can read the password out of it. The unit's UMask=0077 does not help here: it applies to files the service creates once it is running, and never re-chmods a file that was written before the first start.

0640 with group nxdns rather than 0600: /etc/nxdns is a ConfigurationDirectory, which systemd leaves owned by root, and the service runs as nxdns and has to read this file on the first start. A root-owned 0600 file would be unreadable to it.

Do not expect nxdns check to catch a permissive mode here. Its only permission warning is for a TLS private key (WARN doh_server.key_path: ... is mode 644; a TLS key must be readable by its owner only, from checkTlsFiles in src/cli.zig); it never stats the configuration file. A mode 0644 config.zon passes check in silence, so the chmod above is yours to remember.

Check it before you start the service:

nxdns check --config /etc/nxdns/config.zon

A good file prints the source it checked, one OK line per upstream, and OK: no problems found:

checking configuration file /etc/nxdns/config.zon
OK upstreams[0] https://cloudflare-dns.com
OK: no problems found

The upstream probe sends a real query, so this needs working DNS on the host at the time you run it. Exit 2 means check found something to fix and printed every problem it found, not only the first.

The file seeds the database once. From the second start onwards it is ignored and the database is the configuration; see the configuration model and Upgrade nxdns for how to change settings after that.

Once the seed has been consumed — after step 6 confirms you can log in — the plaintext in it is dead weight that only carries risk. The seed's web.password is hashed into web.password_hash at import time and the plaintext is never stored; nxdns export writes .password = "" back out alongside the hash. Nothing downstream ever reads the plaintext again, so delete the file:

rm /etc/nxdns/config.zon

Keep it only if you want the seed as a record of the intended starting configuration, and if you keep it, leave it at 0640 root:nxdns. Note that a kept seed is not a backup — nxdns export is (see Back up and restore), and the export carries the password hash rather than the password.

Verified on this host, with a scratch --config and --data-dir in place of /etc/nxdns and /var/lib/nxdns: a seed written under umask 022 came out 0644, nxdns check --config on it printed OK: no problems found with no mode warning, and after nxdns import of that seed an nxdns export wrote .password = "" next to a populated .password_hash = "$argon2id$v=19$...". The chown, chmod and rm lines above are the ordinary root-owned-file operations and were not run against a real /etc/nxdns, which this host does not have.

5. Start it

systemctl enable --now nxdns
journalctl -u nxdns -f

Not verified on this host: needs root and an installed unit.

A healthy start logs a line naming every socket it bound:

info(nxdns): nxdns <version> serving on udp [::]:53 tcp [::]:53 tcp 0.0.0.0:53; 1 upstream(s); blocklist generation 1

nxdns writes to stderr and systemd captures that into the journal; logging needs no further configuration. Port 53 is privileged, and the unit grants CAP_NET_BIND_SERVICE through AmbientCapabilities.

If the start fails, read Troubleshoot nxdns. The two common first-install failures are a port 53 already held by systemd-resolved and a seed file that does not parse.

6. Confirm it answers

From another machine on the LAN:

dig @<server-ip> example.com A +short

The admin interface is on port 8080 by default; log in with the password from the seed file. http://<server-ip>:8080/api/health reports upstream availability and disk state without a login.

Not verified on this host as written: <server-ip> is a placeholder, and a LAN client to run it from is a second machine this host does not have. What was verified is the same two checks against a local nxdns started from a scratch data directory on an unprivileged port — dig @127.0.0.1 -p 15353 example.com A +short returned the A records, and curl against the web port returned 200. Only the address and the port differ from the lines above.

Raspberry Pi 5

The Pi 5 is aarch64. Nothing about the procedure changes except which tarball you take:

curl -fLO "$BASE/releases/download/v$VERSION/nxdns-$VERSION-aarch64-linux-musl.tar.gz"
sha256sum -c --ignore-missing SHA256SUMS.txt
tar -xzf "nxdns-$VERSION-aarch64-linux-musl.tar.gz"
cd "nxdns-$VERSION-aarch64-linux-musl"
scp nxdns nxdns.service nxdns.conf pi:/tmp/

Then follow steps 3 to 6 on the Pi.

Not verified on this host: no release exists to download, pi is a placeholder for your Pi's hostname, and this page was written on an x86_64 machine with no Pi attached.

Build from source instead

You do not need this to install nxdns, and it gets you a binary nobody has signed. It is here for two cases: you want to run something other than a tagged release, or you want to build the release yourself and compare it against the published one. For the second case, follow Verify a release rather than this section — it says what the comparison is and is not worth.

Requires Zig 0.16.0 and Node.js. From the repository root:

(cd web && npm ci && npm run build)
VERSION=$(sed -n 's/^[[:space:]]*\.version[[:space:]]*=[[:space:]]*"\([^"]*\)".*/\1/p' build.zig.zon)
zig build dist -Dversion-string="$VERSION" -Dgit-commit="$(git rev-parse HEAD)" \
    -Dweb-dist=web/dist -Doptimize=ReleaseSafe

The first command builds the admin interface into web/dist; the last one embeds that directory in the binary. Build the interface every time, before the binary: a stale web/dist ships an admin UI that does not match the API it talks to. dist refuses to run against the web/dist-placeholder default for exactly that reason, so there is no way to skip it by accident.

-Dversion-string is required and has no default. It is what nxdns version prints. Take it from build.zig.zon rather than inventing one: verify-dist asserts that the version under build equals .version there, so a made-up string like 0.0.0-local builds but then fails verification. -Dgit-commit is what distinguishes your build from the published one of the same version.

What comes out under zig-out/dist/ is the same set a release publishes, minus the signature and the image digest:

• bin/<triple>/nxdns — the stripped static binary, one per target
• stage/nxdns-<version>-<triple>/ — the staged payload, one per target
• nxdns-<version>-<triple>.tar.gz — one tarball per target
• SHA256SUMS — the two tarball hashes. The release publishes this as SHA256SUMS.txt, with a third line for the image digest appended

The two targets are x86_64-linux-musl and aarch64-linux-musl. Both binaries are statically linked and need nothing installed on the target host.

Check the result the same way the release pipeline does:

zig build verify-dist -Dversion-string="$VERSION" -Dgit-commit="$(git rev-parse HEAD)" \
    -Dweb-dist=web/dist -Doptimize=ReleaseSafe

verify-dist extracts each archive and asserts the ELF is static and within the size budget, that the layout and file modes are exactly what step 1 lists, and that nxdns version prints what was built. It exits non-zero on any failure.

Verified on this host: zig build dist and zig build verify-dist were both run to completion with the version taken from build.zig.zon. dist produced the two tarballs, SHA256SUMS and the staged payloads described above; verify-dist exited 0 with every check passing and the aarch64 nxdns version check skipped for want of -fqemu. Passing a made-up -Dversion-string=0.0.0-local was also run: dist succeeded and verify-dist then failed with FAIL zon-version: build.zig.zon says '0.0.1', the build says '0.0.0-local', which is why this section reads the version out of build.zig.zon.

From here, join the page at step 2 with the staged directory in place of the extracted one:

cd "zig-out/dist/stage/nxdns-$VERSION-x86_64-linux-musl"
scp nxdns nxdns.service nxdns.conf target:/tmp/

The aarch64 binary is built by the same command and needs no toolchain on the Pi.